Sanitary and high purity fluid handling equipment for the food, beverage, dairy, pharmaceutical, biotechnology and chemical process industries
Home    |     About Us    |     Tools    |     System Design    |     Repairs    |     Locations    |     Contact Us    |     QUOTES
 
 
Sanitary Pharmaceutical Instrumentation
Sanitary & High Purity Pharmaceutical Instrumentation
Sales & Service in MI, WI, IA, IL, IN, OH, KY, TN, WV, PA
 
Jump to:   Analytical   |   Flow   |   Controllers, Meters, Indicators   |   Level   |   Pressure Gauges   |   Pressure Transmitters   |   Temperature
 
 
Analytical Instrumentation:

Click Here to Request a Quote or More Information

Availability: IL, WI
HC/DA Series Toroidal Conductivity Sensors
Anderson Instrument

The HC series toroidal conductivity sensor is specifically designed to be used on CIP systems to measure conductivity in cleaning solutions ranging from 0-200 up to 0-2,000,000 microSiemens/cm and temperature compensated over a range of 0° and 200°C. With its unique stainless steel housing and Teflon coated probe, these sensors are impervious to process coating or contamination. The sensors may be ordered with model DA2, NEMA 4X Transmitter which may be panel, wall, pipe or integral sensor mounted.

Documents:
Brochure
Sensor Manual
Transmitter Manual
3D Drawing
Request a Quote or More Info
 
Flow Instrumentation:

Click Here to Request a Quote or More Information

Availability: IL, WI
HMP Pharmaceutical Turbine Flowmeters
Anderson Instrument

Based on the proven design of the HM turbine meter, the HMP Turbine Flowmeter satisfies the specific design and performance requirements of Life Sciences applications. The HMP uses a bushing and shaft combination which makes the HMP suitable for intense sterilization processes and allows for steam blow down. The HMP is designed in accordance with the current ASME BPE flow meter standard and is provided with necessary certifications and calibration documentation.

Documents:
Brochure
Manual
3D Drawing
Request a Quote or More Info
 
Controllers, Meters, Indicators:

Click Here to Request a Quote or More Information

Availability: IL, WI
AV-9000 Recorder/Recording Controllers
Anderson Instrument

Innovative Printing Technology for Circular Chart Recording This revolutionary circular chart recorder features a four-color marker pen cartridge which prints information as it glides across 10, 11, or 12 inch charts.

Documents:
Brochure
Manual
AV-9000 Time Change
Run/Program Lockout
3D Drawing
Request a Quote or More Info
 

Click Here to Request a Quote or More Information

Availability: IL, WI
AIC 801 Micro-Based 1/8 DIN Controllers
Anderson Instrument

This controller is designed for use on virtually any process control application.

Documents:
Brochure
Manual
Manual - Concise
Model 801 PID Loop Controller Quick Start Notes
ED-190 PROCESS CONTROL PACKAGE
FAQ
Request a Quote or More Info
 

Click Here to Request a Quote or More Information

Availability: IL, WI
AWESOME 1/8 DIN Panel Meters
Anderson Instrument

Analog and digital panel meters offering multiple control and alarm outputs, optional serial communication and specialized functions on analog input units. The units also boast a programmable color change display that is 27% larger than ordinary 1/8 DIN units.

Documents:
Brochure
Manual - DC Process
Manual - Rate Total
Manual- Temperature Indicator
FAQ
Request a Quote or More Info
 

Click Here to Request a Quote or More Information

Availability: IL, WI
GL Series- Micro-based Digital Indicators
Anderson Instrument

The GL Series provides a simple means of specifying one or two digital panel meters (based on Anderson's AWESOME panel meters) pre-mounted in a NEMA 4X watertight enclosure.

Documents:
Brochure
Request a Quote or More Info
 
Level Instrumentation:

Click Here to Request a Quote or More Information

Availability: IL, WI
HB Control Grade Hydrostatic Level Transmitters
Anderson Instrument

The HB "mini" sensor has been specifically designed for use in simple level control applications such as balance tanks and CIP vessels. This product is made to stand up to direct wash-downs and wide variations in temperature ranges.

Documents:
Brochure
Manual
3D Drawing
Request a Quote or More Info
 

Click Here to Request a Quote or More Information

Availability: IL, WI
TDL DP Level Transmitter for Pressure/Vacuum Vessels
Anderson Instrument

A fully electronic, differential pressure/level measurement system. It is designed to monitor levels in pressurized storage tanks, vacuum vessels, and surge tanks.

Documents:
Brochure
Manual
Request a Quote or More Info
 

Click Here to Request a Quote or More Information

Availability: IL, WI
LB/LL Conductive Point Level Sensors and Modules
Anderson Instrument

The LB provides up to four independent level points with probe lengths to 72". Paired with the "LL" switching module, the point level system allows choices of normally open or closed contacts and accommodates a broad variety of conductive media.

Documents:
Brochure
Manual
Startup Guide
Request a Quote or More Info
 

Click Here to Request a Quote or More Information

Availability: IL, WI
SX Pharmaceutical Series Hydrostatic Level Transmitters
Anderson Instrument

The Anderson Pharmaceutical Electronic Level Transmitter (SX) is designed to measure static head pressure in sanitary process and storage tanks.

Documents:
Brochure
Manual
Startup Guide
SL/SX Level Sensor Troubleshooting
Weld-In Shell Manual
Request a Quote or More Info
 

Click Here to Request a Quote or More Information

Availability: IL, WI
LA Pharmaceutical Series "Top Mount" Level Transmitters
Anderson Instrument

Based on Anderson's SX "Driftless" Transmitter, this top mount variation easily replaces problematic devices such as ball floats, pneumatics, capacitance probes and magneto-strictive sensors.

Documents:
Brochure
Manual
Startup Guide
Request a Quote or More Info
 

Click Here to Request a Quote or More Information

Availability: IL, WI
NCS31P Pharmaceutical Series Capacitive Point Level Switches
Anderson Instrument

The NCS31P is designed to work with virtually every liquid media in the Life Sciences market. Based on the capacitive principal the NCS31P is independent of conductivity and performs excellently in media such as WFI. As with all Anderson Pharmaceutical Series Products the NCS31P was designed in accordance with the latest ASME-BPE standard. Due to the low sensor profile the NCS31P can be used in small line sizes without sacrificing dead leg length.

Documents:
Brochure
Startup Guide
Request a Quote or More Info
 
Pressure Gauges:

Click Here to Request a Quote or More Information

Availability: IL, WI
EM Pharmaceutical Series Pressure Gauges (90mm)
Anderson Instrument

The "EM-Series" Sanitary Pressure Gauge is an improved version of the EB series 90mm gauge, incorporating a more compact profile, and the industry's only externally adjustable standard span and offset.

Documents:
Brochure
Startup Guide
Part Number Change
Brochure
3D Drawing
Request a Quote or More Info
 

Click Here to Request a Quote or More Information

Availability: IL, WI
EK Pharmaceutical Series Pressure Gauges (63mm)
Anderson Instrument

This 63mm gauge was developed to address the growing number of biopharmaceutical applications that require a smaller gauge dial and fractional sanitary fitting.

Documents:
AUTOCLAVE
Brochure
Startup Guide
3D Drawing
Request a Quote or More Info
 

Click Here to Request a Quote or More Information

Availability: IL, WI
EP Pharmaceutical Series Digital Pressure Gauges/Switches
Anderson Instrument

This gauge provides a battery-powered, local display of pressure that is 6 times more accurate than its mechanical counter-part, with 3 times the over-range capacity and 5 to 10 times the resolution! The EPS version provides all this, PLUS 2 fully adjustable switches with low-voltage relay outputs for simple control and/or alarming.

Documents:
Brochure
Manual
Firmware
3D Drawing
Request a Quote or More Info
 

Click Here to Request a Quote or More Information

Availability: IL, WI
EG Pharmaceutical Series Analog Pressure Switches
Anderson Instrument

This gauge offers user adjustable high and low set points and provides a separate solid state, ground closure switch for each.

Documents:
Brochure
Request a Quote or More Info
 

Click Here to Request a Quote or More Information

Availability: IL, WI
EB Pressure Gauges
Anderson Instrument

The EB Series pressure gauge offers users adjustable high and low set points and provides a separate solid state, ground closure switch for each.

Documents:
Brochure
Request a Quote or More Info
 

Click Here to Request a Quote or More Information

Availability: IL, WI
Clean Process Measurement Fittings
Anderson Instrument

Sanitary pressure gauges and transmitters that can be installed on lines as small as 1/2" without the need for adapters or reducers, without creating pockets or "dead legs", and without sacrificing performance.

Documents:
Brochure
CPM Fittings
Fitting Solutions for Viscous Products
3D Drawings
Request a Quote or More Info
 
Pressure Transmitters:

Click Here to Request a Quote or More Information
MPP Pharmaceutical Series Modular Pressure Transmitters
Anderson Instrument

Designed specifically for the needs of the Life Science market the MPP Pharmaceutical Series Pressure Transmitter provides state of the art performance in a superior sanitary package. Developed from Anderson’s Next Generation Modular Platform the MPP delivers class leading performance while providing the benefits of a modular architecture, assembled in an ASME –BPE compliant design. The MPP is 24 v DC, Loop powered (2 wire) 4 – 20 mA output with HART 7.0

Documents:
Brochure
Manual
Software
Startup Guide
Startup Guide - Remote
Request a Quote or More Info
 

Click Here to Request a Quote or More Information

Availability: IL, WI
SV Pharmaceutical Series Pressure Transmitters
Anderson Instrument

The Anderson SV Pharmaceutical Series Pressure Transmitter offers not only a new low profile design, but may be ordered with built-in LCD indication.

Documents:
Brochure
Manual
Molded Cordset Bulletin
Startup Guide
3D Drawing
Request a Quote or More Info
 

Click Here to Request a Quote or More Information

Availability: IL, WI
TP HART/SMART Pharma-Series Pressure Transmitters
Anderson Instrument

The Anderson "T" series pressure transmitter is a microprocessor-based sensor specifically designed for sanitary fluid process applications in the pharmaceutical and biotechnology industries.

Documents:
Brochure
Manual
Molded Cordset Bulletin
3D Drawing
Request a Quote or More Info
 

Click Here to Request a Quote or More Information

Availability: IL, WI
HA Pharmaceutical Series Mini Pressure Transmitters
Anderson Instrument

Anderson's newest sanitary pressure transmitter is specifically designed for critical measurements in fractional size lines. This product replaces the two piece fractional transmitter with a very compact, single piece transmitter.

Documents:
Brochure
Manual
Molded Cordset Bulletin
3D Drawing
Request a Quote or More Info
 

Click Here to Request a Quote or More Information

Availability: IL, WI
Autoclaveable HA Pressure Transmitters
Anderson Instrument

Anderson's newest sanitary pressure transmitter improves upon the solid performance of the standard HA by allowing the device to be autoclaved in place. Improved enclosure integrity and tighter accuracy and stability will make this the transmitter of choice in both autoclave and critical applications.

Documents:
Brochure
Autoclave
Application Bulletin
Request a Quote or More Info
 

Click Here to Request a Quote or More Information

Availability: IL, WI
Clean Process Measurement Fittings
Anderson Instrument

Sanitary pressure gauges and transmitters that can be installed on lines as small as 1/2" without the need for adapters or reducers, without creating pockets or "dead legs", and without sacrificing performance.

Documents:
Brochure
CPM Fittings
Fitting Solutions for Viscous Products
3D Drawings
Request a Quote or More Info
 
Temperature Instrumentation:

Click Here to Request a Quote or More Information

Availability: IL, WI
FJ Pharmaceutical Series Digital Temperature Gauges/Switches
Anderson Instrument

The FJ has been designed as a "best-in-class" digital thermometer for typical Pharmaceutical and Bio-tech applications. The unit provides a battery-powered local display of temperature, visible on a large 0.9" LCD display. Numerous fitting choices ensure simple transition from existing bi-metal or other thermometers to the DTG. Optional secondary RTD temperature element, switching/alarming and remote display are also now available. Switching versions can also be "loop-powered" to eliminate the need for batteries.

Documents:
Brochure
Startup Guide
3D Drawings
Request a Quote or More Info
 

Click Here to Request a Quote or More Information

Availability: IL, WI
SW Pharmaceutical RTDs and Temperature Transmitters
Anderson Instrument

Anderson's electronic temperature sensors combine their industry proven all stainless steel construction with new modular components.

Documents:
Brochure
Manual
Manual - Sealed Cable & QDR
SA/SW-7 QDR Wiring Guide
Remote Display
3D Drawing
Request a Quote or More Info
 

Click Here to Request a Quote or More Information

Availability: IL, WI
Pharmaceutical Series Thermowells
Anderson Instrument

Sanitary Clamp Type Thermowells are designed for use with any 1/4" diameter probe having a 1/2" NPT threaded connector. The Sanitary Projectile Type is designed to be welded into process & storage vessels & accept a variety of sensors.

Documents:
Sanitary Thermowell Brochure
Request a Quote or More Info