Sanitary and high purity fluid handling equipment for the food, beverage, dairy, pharmaceutical, biotechnology and chemical process industries
Home    |     About Us    |     Tools    |     System Design    |     Repairs    |     Locations    |     Contact Us    |     QUOTES
 
 
Sanitary & High Purity Stainless Steel Fittings:
Tees, Clamps, Reducers, Crosses, Gaskets & More

Sanitary & High Purity Biopharmaceutical & Food Grade Fittings
Sales & Service in MI, WI, IA, IL, IN, OH, KY, TN, WV, PA
 
 
 




Click Here to Request a Quote or More Information
VNE Sanitary Stainless Steel Fittings
3A Approved for Food & Beverage, Dairy

Clamp Fittings
Clamp Style Fittings are most popular for easy assembly and breakdown of process lines and equipment. T304 Stainless Steel and T316L Stainless Steel materials in 1/2" through 12" sizes. Gaskets available in several different materials: Buna-N, EPDM, Teflon®, and Viton®. Lightweight and heavy-duty clamps complete the unions.

Weld Fittings
Weld Fittings are used on permanent installations where process piping and equipment can be cleaned in place (CIP) and removal from the system is not required. Offered in nominal tube sizes: 1/2" through 8" in T304 Stainless Steel and T316L Stainless Steel materials. Uniform wall thickness for 1/2" through 3" sizes measure .065 (16 ga). In 4" size, wall thickness measures .083 (14 ga), 6" and 8" .109 (12 ga). Polished ID and OD Fittings available for immediate shipment. Other polished combinations may be ordered.

Bevel Seat & John Perry Fittings
Bevel Seat Fittings are used on process equipment and piping to ensure rigidity of the system. Bevel Seat Unions consist of a Threaded Bevel Ferrule mated with a Plain Bevel Ferrule. Both are offered in T304 Stainless Steel and T316L Stainless Steel material. Hex Union Nuts made of only T304 Stainless Steel material are used to complete the union. Gaskets for VNE’s Bevel Seat Unions are not required for positive shut-off. However, gaskets may be purchased upon request. Available in 1" through 4" sizes.

E-Line Fittings
E-Line Fittings have a male and female interface construction to ensure rigidity of your system. VNE offers E-Line Fittings in sizes 1" through 6" in T304 Stainless Steel and T316L Stainless Steel material. Polished ID and OD Fittings for immediate shipment. Other polished combinations may be ordered. Gaskets for E-Line Fittings are available in several different materials: Buna-N, EPDM, Teflon®, and Viton®.

Unpolished Tube Od Weld Fittings
Unpolished Tube OD Weld Fittings are used in a wide variety of industrial applications where sanitary finishes are not generally required. VNE’s tumbled finish presents a consistent uniform appearance. VNE’s Unpolished Weld Fittings are offered in nominal tube sizes: 1/2" through 8" in T304 Stainless Steel and T316L Stainless Steel materials. Uniform wall thickness for 1/2" through 3" sizes measure .065 (16 ga). In 4" size, wall thickness measures .083 (14 ga), 6" and 8" .109 (12 ga).

View VNE Sanitary Stainless Steel Fittings Brochure
 




Click Here to Request a Quote or More Information
MaxPure Bio-Pharmaceutical Fittings
"Maximum Purity with Guaranteed Ra"

Where cleanability of fittings is the issue, every step in the production process must be carefully controlled. MaxPure’s production methods ensure that no mechanical damage or flaws occur during manufacturing. Cleaning procedures incorporate multi-process degreasing and washing steps to eliminate any residues of hydrocarbons and stains, using deionized water.

Procedures and process capabilities also ensure formation of a stabilized passive layer, increasing corrosion resistance.

Maximum Cleanability
Cleanability defines how easily contaminants can be removed from a surface. MaxPure's process guarantees the correct finish requirements, chemical composition and passivity state, with no major physical and / or metallurgical flaws.

Full Traceability
Traceability starts with certifications and incoming inspection of raw materials, through in-process quality control, final inspection, marking and packaging. The process is also completely documented with a unique job number for each BPE process component.

Every Fitting is Quality Inspected
All around quality and meticulous inspection insures that every fitting will be of the highest quality and in total compliance with all ASME-BPE 2007 standards.

Fittings Include:
Elbows - 90° & 45°
Elbows - 88° & 42°
Tees
Reducers
Crosses
Use Points
Ferrules & End Caps
Adapters & Stub Ends
Clamps
Gaskets & Pipe Hangers
True Y


View MaxPure Bio-Pharmaceutical Fittings Brochure
 




Click Here to Request a Quote or More Information
Top Line Sanitary and Biopharmaceutical Fittings and Clamps

Pureserve Systems carries Top Line's complete line of sanitary and biopharmaceutical fittings and clamps. Top Line has been supplying high quality stainless steel products to the dairy, food, beverage, pharmaceutical and other process industries for over twenty-five years. Top Line specializes in stainless steel materials-types 304, 316 and "L grades".

Click on a product line below for more information:

Bevel Seat Fittings
Biopharm Fittings
Clamp Fittings
Large Diameter Fittings
Minifittings
Miscellaneous Fittings
Sanitary Butt Weld
Tube O.D. Butt Weld Fittings
 
GEA Tuchenhagen VARINLINE® In-Line Instrument Housing

The core component of the Tuchenhagen range of in-line control and measurement technology is the 'In Line Access Unit' process connection fitting. It is a two-port straight-through housing with two lateral fittings for the connection of instruments. An exception are the nominal widths DN 10 (1/2") and DN 15 3/4") which has a single instrument port. Depending on the nominal width of the In Line Access Unit and the installation depth of the instruments, it is possible to incorporate two instruments maximum.

Features:
  • Can be butt weld into the pipe circuit.
  • Pocket free without sumps or domes.
  • Gap free product seal by means of an O-ring.
  • Standard connections for instrumentation irrespective of pipe diameter and process variables.
View GEA Tuchenhagen VARINLINE® In-Line Instrument Housing Brochure
 
Sanitary Instrument Tees and CPM's
Fluid Line Technology

For over 20 years, Fluid Line Technology has been the answer to the need for manufacturing quality stainless steel custom fabrications and standard sanitary components for the Bio-Technology, Bio-Pharmaceutical, Food, Dairy, Beverage and Semi-Conductor marketplace.

Benefits:
  • BPE compliant / Sanitary design
  • Fully customizable for specific customer needs
  • Autoweld and clamp connections are standard

Technical Information:
  • Pressure rating up to 150 psi
  • Variety of surface finishes available
  • Variety of Alloy materials available
  • Variety of chemical treatments available
  • MTR's standard for full material traceability (Heat numbers/codes
View Sanitary Instrument Tees and CPM Brochure

View all Fluid Line Technology Products and Capabilities